View OCL-400MSD-X-T_4508871.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

OSA Opto Light GmbH Kopenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 Fax: +49 (0)30 65 76 26 81 E-Mail: contact@osa-opto.com
preliminary Series 400 - Ceramics thin film technology
Features
size 3,0(L) x 2,0(W) x 1,0(H) mm circuit substrate: Al2O3 Ceramics devices are ROHS conform lead free solderable, soldering pads: gold plated taped in 8 mm blister tape, cathode to transporting perforation all devices sorted into luminous intensity classes taping: face-up (T) high luminous intensity types on request sorted in color classes
Absolute Maximum Ratings
IF, max[mA] 50 IF,P [mA] tp 100 s =1: 10 70 VR [V] 5 IR, max [A] 100 Thermal resistance R thJA [K / W] 60 TOp [C] -40...85 TSt [C] -40...85
50
40
30
20
Maximal forward current (DC) characteristic
IF [mA]
10
0
-40
-20
0
20 40 Top[ C]
60
80
100
Electro-Optical Characteristics
Type OCL-400 MY OCL-400 MSD Emitting color yellow red Marking at anode anode Measurement IF [mA] 20 20 typ 2,1 2,1 VF[V] max 2,6 2,6 d / p* [nm] 589 624 IV[mcd] min typ 250 400 250 400
(c) 2008
OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 contact@osa-opto.com
preliminary edition 03/08
90 1,0 0,8 0,6 0,4 0,2 0,0 0,2 0,4 0,6 0,8 1,0 180 0 150 30 120 60
view angle
10
IF (mA)
MY MSD
UF - IF characteristic
1
1,6
1,7
1,8
1,9
2,0
2,1
2,2
2,3
2,4
2,5
2,6
UF (V)
3
MSD MY 2
Iv rel (at 20 mA )
IF - Iv, rel characteristic
1
0
10
20
30
40
50
IF (mA)
(c) 2008
OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 contact@osa-opto.com
preliminary edition 03/08
Outline Drawing
Recommended Soldering Patterns
Soldering Conditions
300
250 10-20 s
Temperature (C)
230C 200
150 Max. 40 s 100
IR reflow soldering profile
50
0 50 100 150 200 250 300
Time (sec)
IR reflow soldering profile for lead free soldering
Manual soldering:
max power of iron 25W/ 3s/ 300 C
(c) 2008
OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 contact@osa-opto.com
preliminary edition 03/08
Ordering Code For Parts
Series Color Encapsulation Packaging
OCL-400
-
???????
-
X
-
T T - taped
X - uncolored clear Type definition, e.g. OCL-400 MY-X -T
LED Luminous Intensity Groups And Subgroups [ mcd ]
(general information - not this device specific)
C: D: E: F: G: H: J: K: L: M: N: P: Q: R: S: T: U: V: W: X: Y: Z: 0.28 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18 28 45 71 112 180 280 450 710 1120 1800 2800 4500 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18.00 28 45 71 112 180 280 450 710 1120 1800 2800 4500 7100 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: J1: J2: K1: K2: L1: L2: M1: M2: N1: N2: P1: P2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 71.00 Q1: Q2: R1: R2: S1: S2: T1: T2: U1: U2: V1: V2: W1: W2: X1: X2: Y1: Y2: Z1: Z2: 71 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 7100
Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of 11 %. Special service: Brightness selection in sub selections possible. Color selection in sub selections possible (each subgroup per reel).
Attention please: The LED output is strong enough to injure human eyes. Precautions must be taken to prevent locking directly at the LED with unaided eyes for more than a few seconds. Flashing lights have been known to cause discomfort in people, you can prevent this by taking precautions during use. Also, people should be cautions when using equipment where these LEDs are incorporated.
(c) 2008
OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 contact@osa-opto.com
preliminary edition 03/08
Tape And Reel Packing
D 180 mm 330 mm
Parts/reel 2000 8000
Packing:
The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack
Label
Order No. Type Intensity group Charge No. Quantity
XXXXXXXXX OCL-400 ?????-??-T ZZ
Color class: CC
Customer order No.
Color class - optional 11 Week - 22 year - A internal identification
1122-AAAAAA 9999
Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems and safety systems must be expressly authorized for such purpose!
(c) 2008
OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 contact@osa-opto.com

▲Up To Search▲

Price & Availability of OCL-400MSD-X-T

	To Download OCL-400MSD-X-T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .